Steri-Fab All-in-One Disinfectant & Insecticide Spray, 16 oz,

Description

Sleepless nights do not stand a chance when you have Steri-Fab All-in-One Disinfectant & Insecticide Spray, 16 oz, in your kit. It is an EPA-registered contact killer and disinfectant that dries in minutes, leaves no lingering residue, and is trusted by pros for on-the-spot knockdown on mattresses, furniture and other inanimate surfaces, while also disinfecting listed bacteria and viruses.

Key Customer Benefits

• Fast contact kill on tough targets with no film left behind. Steri-Fab is a quick drying disinfectant insecticide that kills exposed bed bugs, fleas, lice, ticks, mites and roaches on contact, then evaporates in about 15 minutes so there is no residue on fabrics or furniture. This makes it a smart non residual bed bug spray for mattresses and upholstery where residues are not wanted.
• Disinfects while you de-bug. Unlike most pest sprays, Steri-Fab is an EPA-registered virucide and disinfectant as well as an insecticide. In one pass you can reduce listed bacteria, viruses, fungi and odor-causing organisms on inanimate surfaces, which is helpful for sick rooms, shared rentals and transit environments.
• Safe placement where other insecticides are restricted. Because it leaves no residual, Steri-Fab is labeled for use on mattresses and upholstered furniture when used as directed. Pros rely on it for sensitive sites between launder cycles or before installing encasements.
• Practical for real apartments and real schedules. Ready to use from the bottle with no mixing. The alcohol-based formula flashes off quickly, which limits downtime in small bedrooms or busy living areas. Users commonly report a light rubbing-alcohol smell that dissipates as it dries.
• Fits into an integrated plan. Since it is a contact kill product, you can pair it with monitoring and follow-up steps such as laundering, encasements and residual crack-and-crevice treatments where appropriate. This “contact first, then monitor and follow up” approach mirrors guidance shared by professionals and reputable retailers.
• Transparent ingredients and label clarity. Manufacturer and distributor materials list key actives such as isopropyl alcohol, quaternary ammonium compounds and the pyrethroid phenothrin, with current EPA-stamped labels available online for verification. This builds trust when you need to know exactly what you are using.

Product Description

What this product is

Steri-Fab All-in-One Disinfectant and Insecticide Spray is a ready-to-use, quick-drying contact spray that does two jobs at once. It kills listed pests like bed bugs, fleas, ticks, mites, lice and roaches on contact, and it disinfects listed bacteria, viruses and fungi on inanimate surfaces. The formula is non residual, so once it dries in roughly 15 to 20 minutes it is essentially inactive. That is exactly why professionals reach for it on mattresses, upholstered furniture and other places where you do not want a lingering chemical film.

How it works

Steri-Fab combines three well known toolsets in one bottle. First, isopropyl alcohol provides fast knockdown and a rapid dry. Second, a dual quaternary ammonium disinfectant attacks the cell walls of bacteria and fungi and helps inactivate certain viruses on hard, non-porous surfaces. Third, a small amount of the pyrethroid phenothrin adds insecticidal punch for exposed pests. This trio delivers a quick contact kill for insects and a labeled level of disinfection, then it flashes off without residue.

What makes it effective and different

Two traits set Steri-Fab apart. It is one of the only non residual sprays specifically labeled for mattresses and upholstered furniture when used as directed, which matters in bedrooms and rentals where fabric safety and fast turnaround are critical. It also dries to nothing you can feel, so there is no filmy aftermath on couch arms, headboards or luggage. The manufacturer is unusually clear about this point. They state that once Steri-Fab dries it is no longer active, which reinforces its role as a targeted contact killer and disinfectant rather than a long term barrier.

From a practical standpoint, that non residual profile makes Steri-Fab a perfect bridge between steps in an integrated plan. You can treat seams and tufts before installing encasements, spray a wheelchair or clinic chair between users, or de-bug luggage and a mattress tape edge while you queue the hot wash. Distributors to the professional market describe the same use case. They position Steri-Fab as a contact kill and disinfectant that deodorizes and helps you keep operations moving with minimal downtime.

Product Specifications

Spec	Details
Product name	Steri-Fab All-in-One Disinfectant and Insecticide Spray, 16 ounce trigger bottle.
What it does	Contact kill of listed insects such as bed bugs, fleas, ticks, mites, lice and roaches, plus disinfection, sanitizing, deodorizing and fungistatic action on labeled organisms and surfaces. Non residual after it dries.
Active ingredients	Isopropyl alcohol 60.39 percent; Didecyl dimethyl ammonium chloride 0.114 percent; N-alkyl dimethyl benzyl ammonium chloride 0.076 percent; Phenothrin 0.22 percent. Inert ingredients 39.20 percent.
EPA registration	EPA Reg. No. 397-13. U.S. manufacturer: Noble Pine Products Co., Yonkers, New York.
Drying time	Dries in about 15 minutes under typical room conditions. No residue left once dry.
Labeled use sites	Mattresses and box springs, upholstered furniture, carpets and rugs, cracks and crevices, vehicle interiors, lockers and drawers, kennels and animal bedding areas, hospitals and medical facilities, offices, apartments, hotels and more. Do not spray people or animals.
Coverage guidance	Apply until surfaces are thoroughly damp and remain wet for at least 10 minutes for labeled sanitizing and disinfection. Mattress guidance: single bed or cot, about 4 to 6 ounces; double bed, about 6 to 8 ounces. Upholstered chairs, about 4 to 5 ounces; regular sofas, about 6 to 8 ounces; convertible sofas, about 8 ounces. Keep approximately one foot from surface while spraying and cover seams, folds and tufts.
Contact time	Allow treated hard, non-porous surfaces to stay wet for at least 10 minutes for bactericidal, virucidal and fungicidal label claims.
Odor and appearance	Clear liquid with alcohol odor, no added perfume. Designed not to stain most fabrics when used as directed.
Flammability and storage	Highly flammable liquid and vapor. Keep away from heat, sparks and open flames. Store in a cool, dry, ventilated area. Keep container closed. Do not freeze.
Compatibility notes	Do not apply on waxed or unfinished leather and other waxed surfaces. Test in a small, hidden spot before wide application. Do not contaminate food, dishes or utensils.
Where it should not be used	Not for application to skin, hair or clothing being worn. Do not spray pets or people. Use pet-specific products for animals before they re-enter treated areas.
Package size options	16 ounce trigger bottle and larger refill sizes such as 1 gallon.

 

How to Use Steri-Fab Properly

The steps below follow the current EPA-stamped label and the manufacturer’s instructions. I have added few tips from credible sources so you can work quickly and safely, and get the best performance from a non residual, quick drying contact spray.

Before you start: safety, ventilation, and a fabric test

1. Ventilate and remove ignition sources. Steri-Fab contains isopropyl alcohol. It is a flammable liquid and vapor until dry. Turn off flames, pilot lights, candles, and smoking materials. Open windows or run a fan for airflow.
2. Gloves and eye protection are smart. You are spraying seams, tufts, and edges up close. Light nitrile gloves and eyewear keep the job clean.
3. Spot test fabric. Choose a hidden corner on upholstery or a mattress encasement. Mist lightly and let it dry. Proceed if there is no color change or ring. The label advises testing and avoiding waxed leather and similar finishes.

Good prep multiplies the effect of any contact spray. Strip bedding into sealed bags for laundering on a hot wash and high heat dry. Pull the bed six inches from the wall, vacuum along mattress tape edges, tufts, and the bed frame, then empty the vacuum outdoors. If you are battling bed bugs, plan to install encasements and add monitors after spraying. These are standard, evidence-based steps in integrated bed bug control.

How much to apply on mattresses and furniture

Steri-Fab works by contact, so coverage matters. The label spells out real-world amounts that help you avoid under-treating.

• Single or folding cot mattress. Use about 4 to 5 ounces total.
• Double mattress. Use about 6 to 8 ounces total.
• Upholstered chair or love seat. Use about 4 to 5 ounces.
• Regular sofa. Use about 6 to 8 ounces.
• Convertible sofa. Use about 8 ounces.

Hold the sprayer roughly one foot from the surface and work methodically so seams, folds, tufts, buttons, welting, and tape edges are uniformly damp.

Technique for bed frames, drawers, and room items

For frames, headboards, baseboards, and non-porous surfaces, spray until the surface is thoroughly damp. On hard, non-porous surfaces that you are disinfecting, keep the surface wet for at least ten minutes, which is the contact time the label requires for bactericidal, virucidal, and fungicidal claims. Wipe away any remaining moisture after the contact time if needed.

Dry time and re-use of the room

Steri-Fab is designed to dry quickly and leave nothing behind. Under normal room conditions, expect around fifteen minutes to dry. Once dry, it is non residual and no longer active. Allow fresh air in as it dries, then re-make the bed and move on to your follow-up steps.

Follow-up steps

Because this is a contact-only spray, build a simple routine for the next two to three weeks.

• Launder and heat dry bedding on a schedule.
• Install mattress and box spring encasements after the surface is dry.
• Add interceptors or monitors to the bed legs for early warning.
• Pair with labeled residual or IGR products in cracks and crevices if your program calls for it, or schedule a professional if the activity persists. These integrated measures are consistent with guidance from EPA and university extensions.

Coverage for larger areas

If you are disinfecting floors, chairs, or room contents beyond the bed, the manufacturer advises planning by square footage. As a rule of thumb, one gallon treats about 1,500 square feet when used for disinfection. Scale down accordingly for a 16 ounce bottle.

Keep a small kitchen scale handy when you are learning the coverage amounts. Weigh the bottle before and after a mattress to confirm you applied the recommended ounces. It removes the guesswork and ensures you get the contact you paid for.

Frequently Asked Questions

Does Steri-Fab leave a residue or keep killing after it dries?

No. Steri-Fab is a contact-only spray. It kills when wet and becomes essentially inactive after it dries, which is why pros like it for mattresses and upholstery where residues are not wanted.

How long does it take to dry, and when can I reuse the room or furniture?

Under normal indoor conditions, expect about 15 minutes. Once dry, items can be used again. Keep fresh air moving while it dries.

Is it really labeled for mattresses and sofas? How much should I use?

Yes, the EPA-stamped label gives clear ounce-by-ounce guidance. Single or cot mattresses use about 4 to 5 ounces. Double mattresses use about 6 to 8 ounces. Love seats use about 4 to 5 ounces. Regular sofas use about 6 to 8 ounces. Convertible sofas use about 8 ounces. Hold the sprayer about one foot from the surface and wet seams, tufts, folds and tape edges evenly.

Can I use Steri-Fab to disinfect, or is it only for bugs?

It is both. The product is a disinfectant on hard, non-porous surfaces for labeled organisms, and it provides antimicrobial action on soft, porous items like mattresses and upholstered furniture. Follow the label contact time so the surface stays wet for effective disinfection.

What contact time is required for disinfection on hard, non-porous surfaces?

Keep the surface wet for at least ten minutes to meet the label’s bactericidal, virucidal and fungicidal claims. Wipe any remaining moisture afterward if needed.

Does Steri-Fab kill all life stages of bed bugs?

Retailer tech support notes that Steri-Fab kills exposed bed bugs on contact, including nymph stages and adults. Because it has no residual, you still need follow-up steps such as laundering, encasements and monitoring to address newly hatched bugs you did not spray directly.

Is Steri-Fab safe once it is dry?

Yes. Multiple retailer Q and A responses emphasize that once Steri-Fab has dried, treated items can be used again. Remember that it is flammable while wet, so keep flames and sparks away during application and drying.

Is it flammable, and what safety steps should I take?

Yes. The SDS lists Steri-Fab as a highly flammable liquid and vapor due to isopropyl alcohol. Remove ignition sources, do not smoke, and ventilate while applying. Store away from heat and food items.

Can I spray pets, people, or clothing being worn?

No. Steri-Fab is for inanimate surfaces only. Do not apply to skin, hair, people, pets, or clothing being worn. Use pet-specific products for animals and allow treated areas to dry before re-entry.

Will it stain fabrics or damage finishes?

The manufacturer positions Steri-Fab as suitable for most fabrics when used as directed, and users often report no residue. That said, some technicians on forums warn that alcohol-based sprays can dull or damage certain wood finishes. Always test a hidden spot before broad use.

Can I use it outdoors or only indoors?

Retailers and labels position Steri-Fab for indoor use on mattresses, upholstered items and hard, non-porous surfaces. It is not an outdoor perimeter product. Use it where a quick-drying, non-residual contact treatment and disinfection are needed.

How much area does a bottle cover if I am disinfecting a room?

The manufacturer’s guidance estimates that one gallon treats about fifteen hundred square feet for disinfection. A 16 ounce bottle is one eighth of a gallon, which gives a rough planning figure of about one hundred eighty to two hundred square feet, depending on how wet you keep the surface to maintain contact time.

What is the best spray technique for beds and chairs?

Clean first, then spray from about one foot away in a fine, even mist. Focus on seams, tufts, buttons, welting and tape edges. For hard, non-porous surfaces, keep them wet for the required ten minutes. This matches the label and the manufacturer’s step-by-step guidance.

Can consumers use Steri-Fab, or is it only for professionals?

Both. The manufacturer states it is easy to use with a trigger sprayer and dries in about fifteen minutes, which makes it practical for homes, offices and clinics that need fast turnaround between users.

Conclusion

If you need a fast, no-nonsense contact kill that also cleans up the hygiene side of the problem, Steri-Fab All-in-One Disinfectant and Insecticide Spray is a reliable tool to keep on hand. It dries in minutes, leaves no film, and is labeled for mattresses, sofas, and other in-home and facility surfaces when used exactly as directed. That means you can knock down exposed bed bugs, fleas, mites, or roaches while also disinfecting listed organisms on hard, non-porous surfaces, then move on with your day once it has dried.

As a pest professional, I see Steri-Fab shine in real life when it is part of a simple plan. Use it as your quick-dry contact step, then follow through with laundering, encasements, monitoring, and other label-appropriate measures for lasting results. This mirrors EPA’s integrated pest management guidance for homes and small facilities.