Chimney Saver Water Repellent is a safe and proven solution to the problem of excessive moisture in wood-burning fireplaces. If your home has a chimney that is pouring moisture into the air or if you have water under your house, suffering from water damage to your furnace or hot water heater or leaks in the walls or floors of your home, Chimney Saver Water Repellent will stop it. It’s that time of year again; spring cleaning! Many people complete their familiar routines and start cleaning their chimneys from all the accumulation. The one operation that is often overlooked while taking care of your chimney is doing a thorough inspection in order to clean away any creosote or unwanted buildup. Chimney Saver Water Repellent, who offers a wide variety of chimney services, provides important information on the time-consuming process to keep your chimney buddle-free! Chimney Saver Water Repellent is the chimney water repellant that fixes wet chimneys and makes them warmer with less creosote. Chimney Saver Water Repellent is easy to install, with no caustic chemicals, and can save hundreds of dollars in chimney repairs! In the unfortunate event of a chimney fire, it’s important to contain as much as you can before calling for help. What you don’t want to have happen is for the water you’re using to put out the fire flow down into your home or onto your deck or patio. You could easily cause additional damage that could have been easily avoided by installing Chimney Saver – Water Repellent.

Chimney Saver Water Repellent

Introduction

It’s important to protect your chimney from water damage. Water can seep into cracks and mortar joints, causing them to deteriorate over time. This can lead to blocked flues and chimney leaks that threaten the structural integrity of your home—not to mention how much it will cost you in repairs! In addition, water can make its way down a chimney even when the fireplace is not being used. That’s why we recommend applying a water repellent formula like Chimney Saver Water Repellent as part of your routine masonry maintenance!

Our Clear Topical Chimney Water Repellent is great for routine maintenance.

Our Clear Topical Chimney Water Repellent is great for routine maintenance. It’s a clear, odorless formula that won’t darken bricks or mortar and can be applied to both vertical and horizontal surfaces. However, it should not be used on flues or below the damper.

The clear formula will stay clear and not darken bricks or mortar.

Chimney Saver Water Repellent is a clear formula that will not darken bricks or mortar. The product can be applied to both vertical and horizontal surfaces, including brick, cement and mortar.

The manufacturer recommends Chimney Saver for use on masonry chimneys but does not specify the thickness of the coating required. It also suggests that you should test before applying to the entire surface of your chimney.

Chimney Saver Water Repellent can be applied to both vertical and horizontal surfaces.

Chimney Saver Water Repellent can be applied to both vertical and horizontal surfaces. The product can be used as a coating for brick, stone and concrete or mortar joints.

Like most water repellents, it’s not intended for use on flues or below the damper.

Like most water repellents, it’s not intended for use on flues or below the damper. Additionally, you should never apply Chimney Saver Water Repellent to brick or mortar. Also, do not spray chimneys with this product if they have been painted in the past 12 months; we recommend that you remove any old paint before using Chimney Saver Water Repellent. If your chimney has metal flashing at its base and/or a metal cap over its top, avoid spraying any part of these surfaces with this product since moisture can cause rusting and corrosion. Finally, don’t spray Chimney Saver Water Repellent on concrete masonry joints because doing so could cause discoloration that lasts for years after application—and we don’t want that!

One gallon of Chimney Saver Water Repellent will cover up to 80 square feet per coat.

One gallon of Chimney Saver Water Repellent will cover up to 80 square feet per coat. In other words, one gallon will be sufficient for a maximum of four coats on a chimney that measures 8′ x 10′.

We recommend applying two coats for maximum water repellency.

To provide maximum protection, we recommend applying two coats of Chimney Saver Water Repellent.

• Apply your first coat as you would any other stain or paint product.
• Let the first coat dry for at least 24 hours before applying a second coat. This will allow each of the layers to set up and form a protective layer over your chimney, preventing water penetration in future rainstorms and snow events. Keep in mind that it takes about 8 hours for one coat of stain or paint to fully dry on average, so plan accordingly!
• Don’t worry if you miss an area with the second coat; just apply more Chimney Saver Water Repellent and continue until all sides are covered evenly. If done correctly, this method should last you at least five years without having to reapply any more coats unless there’s significant damage done by weather elements such as hail or high winds hitting your chimney directly during those times when they occur most often (typically springtime).

Protect your chimney from water damage with our Chimney Saver Water Repellent

Chimney Saver Water Repellent is a patented solution that protects your brick, stone and mortar chimneys from water damage. It’s a water repellent that repels moisture and keeps rainwater from penetrating the porous surface of your fireplace or fireplace insert. This solution also helps prevent ice buildup when used during the winter months so you won’t have to worry about any safety hazards that might come with it.

If you’re concerned about the aesthetic appeal of your chimney, we have another product called Chimney Saver Clear Coat which creates a protective barrier on top of our water repellent solution without hiding the beauty of your masonry surface!

Conclusion

We recommend using our Chimney Saver water repellent for routine maintenance of your fireplace. It’s great for protecting bricks and other porous materials from rain and snow, as well as reducing absorption of liquid in general. Its clear formula will not darken bricks or mortar, so you can be sure it won’t affect the way your chimney looks! We also recommend applying two coats for maximum protection against water damage.