Industrial Bed Bug Killer

Industrial bed bug killer is an important device in any industrial organization. It helps to kill the pests and prevent any serious damage to the organization’s property. Some may find it surprising to learn that bed bug problems are not limited to smaller, less industrial facilities and homes. Despite their name, bed bugs don’t care where they take up residence, and they can be found in almost any place that humans frequent.

Industrial Bed Bug Killer

Bed bug spray can control and even eradicate infestations, but they can come with harmful levels of toxicity—not to mention strong chemical odors—that require vacating the area until the spray clears.

Sprays are generally water- or oil-based formulas, the former of which could possibly damage electronics, documents, and wooden surfaces if used in excess. Oil-based sprays can stain whatever they’re applied to, and often leave a sticky residue, though that’s typically removable with soap and water.

To avoid these issues with sprays, some folks plagued by bed bugs try alternative measures. These include steam cleaning and washing items in hot water, as exposure to temperatures of 185 degrees Fahrenheit kills bed bugs.

Diatomaceous earth—a silica-rich powder made from the sediment of fossilized algae—can be employed to banish bed bugs by destroying their exoskeleton. There are also traps designed to lure and eliminate bed bugs. You may wish to consider the preventive measures and treatments below before reaching for a bed bug spray.

• Prevent: The scent of lavender repels and can even kill bed bugs; use as an essential oil sprayed in areas where bed bugs nest, like baseboards and beds. Peppermint leaves, another natural bed bug repellent, can be ground and scattered at the base of the bed and in the corners of a room. Using scented dryer sheets on clothing and bed linens may discourage the parasites, and for physical defense, put double-sided tape on your bedposts and bedframe to hamper the insects’ ability to crawl to you.
• Clean: Consistent house cleaning can help keep bed bugs at bay. Vacuum bed bugs into the machine’s isolated chamber, then remove the chamber, treat it with rubbing alcohol to kill the insects inside, and rinse before returning to the vacuum. Use a stiff brush when vacuuming curtains, upholstery fabrics, and your mattress to ensure that bed bugs and eggs cannot remain hidden in the folds of material.
• Isolate: Confine the infestation to kill the insects without unintentionally triggering a migration. Move the bed away from the wall and surround the feet of the bed frame with baking soda to prevent bugs from climbing down. Any items that could have been exposed should be removed from the area and immediately washed in hot water or treated with effective bed bug killers. Any items that cannot be washed or treated should be thrown away in a sealed bag for garbage collection.
• Treat: Mild bed bug infestation may be treated with common household products. Sprinkle baking soda around bed posts or spread crushed silica gel—commonly found in new shoe boxes and product shipments—on the ground to create a barrier around your bed posts that is safe for kids and pets. For a contact killer, dilute rubbing alcohol or tea tree oil (20 drops, or .03 fluid ounces) into 32 fluid ounces of water and spray directly on bed bugs. Or simply blast them with a hairdryer on its hottest setting.

If the DIY treatments and the sprays described here fail to kill the bed bugs, then you may need to hire a professional exterminator to deal with the infestation.

What to Consider When Choosing the Best Bug Spray 

Don’t just grab the best-looking bed bug spray available. A flashy logo on packaging might draw attention, but the ingredients inside, application method, and longevity matter most when choosing a bed bug spray. You should also consider whether the bed bug sprays work on contact to immediately kill bed bugs or if it’s a residual treatment that kills slowly to increase poison transmission to other adult bed bugs and bed bug eggs.

Contact vs. Residual 

Bed bug sprays are generally split into two types: Contact bed bug spray and residual bed bug spray.

• Contact bed bug spray is designed to kill quickly when the solution comes in contact with a bed bug. This bed bug killer spray is an effective way to treat a small infestation or to quickly kill any stowaway bed bugs in your luggage after a trip. Some contact sprays can remain active for up to 16 weeks, but the bed bugs need to touch the spray for it to be effective.
• Residual bed bug sprays are a better option than other bed bug sprays for controlling bed bugs at home because the poison takes longer to kill the affected bed bugs, allowing them to spread the poison to other bed bugs, ultimately killing more than with a simple contact spray.

Ingredients 

It’s necessary to determine the ingredients of a bed bug spray so that you know what the potential dangers are to you and your family, as well as the effects of the spray on the bed bugs. Common bed bug spray ingredients include pyrethrins and pyrethroids, desiccants, cold pressed neem oil, chlorfenapyr, neonicotinoids, and insect growth regulators.

• Pyrethrins and pyrethroids are derived from chrysanthemum flowers and are the most commonly used active ingredient in indoor pest control solutions. However, this doesn’t mean that they are safe. These active ingredients target the central nervous system of the insect, triggering paralysis and then death, so make sure to follow the label when applying these products.
• Desiccants, like diatomaceous earth or boric acid, break down the waxy, protective outer layer on a bed bug causing them to dehydrate and die. These active ingredients are common residual bed bug sprays.
• Cold pressed neem oil is currently the only biochemical pesticide registered with the EPA for use against bed bugs. This is a contact killer spray that is effective against small infestations.
• Chlorfenapyr is a pro-insecticide, meaning that it remains inactive as a pesticide until the insects ingest the compound. Once ingested, it breaks down and forms a lethal chemical that disrupts functions in the bed bug’s cells, resulting in death.
• Neonicotinoids are a relatively new method for treating bed bugs. This active ingredient is a synthetic form of nicotine that is used to overload the nicotinic receptors by causing the nerves to fire repeatedly until they fail. This nervous system overload leads to paralysis and death.
• Insect growth regulators are designed to interfere with the natural development and reproductive cycle of the bed bugs. They can be used to either alter the development of the external shell, leading to dehydration and death, or to stop development into adulthood.

Application 

Typically, bed bug spray is relatively easy to use. The most important step is to carefully read the instructions from the manufacturer before you start spraying to ensure it is safe to use on bedding, as well as any other precautions and recommendations.

Typically, you simply spray the product in common locations where the bed bugs travel, like cracks and crevices, then leave it for a few hours to several weeks, depending on the longevity of the spray. If you have a mild bed bug treatment that is safe for use on pillows, bed sheets, and mattresses, then apply the spray to the bed, allowing several hours for the bed bug spray to work.

Keep in mind that bed bugs can also hide in cracks and crevices in the headboard, footboard, rails, support slats, box spring, and any drawers that your bed may have. Additionally, bed bugs are likely to flee a toxic environment, so make sure you have enough spray to treat the entire room. If you are concerned about bed bugs in the walls, floor, or ceiling, consider using a bed bug fogger to ensure the chemical treatment seeps into all the narrow gaps, nooks, and crannies in the room.

Longevity

After application, the bed bug spray will begin to work. When a bed bug comes in contact with the spray it is either immediately affected by contact killers or it may spread the treatment to other bed bugs if it was a residual killer. The longevity of a bed bug spray is not an indication of how long it will take to kill, but how long it remains active after application.

On average, a bed bug spray will remain effective for about 2 weeks after application, as long as it is not washed, rinsed, or otherwise disturbed. Some bed bug sprays can even last for up to 16 weeks, ensuring that the treated areas continue to control the bed bug population for up to 4 months. Always check the longevity of a product before investing in an easy bed bug spray.

Industrial Bed Bug Killer

Industrial bed bug killer is a product that kills bed bugs.

The product is effective and safe to use on all surfaces, including mattresses, sofas and chairs, carpets, upholstery and wood. It is recommended for use in homes, offices and hotels.

Industrial bed bug killer contains 10% pyrethrin which kills both adult and juvenile stages of the insect. The pyrethrin is extracted from the chrysanthemum plant and is active against many other insects as well. The active ingredient in this product has been shown to be safe for use around humans and pets.

This product is made in the United States by a company that has been making pest control products since 1980. They specialize in providing quality products that are safe for you and your loved ones while still being effective at killing pests such as bedbugs or fleas.

List Of Industrial Bed Bug Killer