Bed Bug Heat Treating Equipment

Bed Bug Heat Treating Equipment is used to treat bed bugs. It uses heat to kill bed bugs and their eggs. The equipment can be used as a stand-alone system or combined with other treatment methods such as vacuuming, steaming, and dry cleaning.

Heat-treating equipment is usually portable and can be used in homes, hotels, apartments, dorms, and offices. Bed Bug Heat Treating Equipment can also be used on furniture, carpets, mattresses, and other infested areas where bed bugs reside.

A Bed Bug Heat Treatment System consists of a booth that contains an electric heater that heats up the air inside the booth to temperatures between 120°F – 140°F for about one hour (or until all surfaces reach these temperatures). This kills all stages of bed bugs as well as their eggs. The system also includes a blower that circulates warm air throughout the entire building (including attic spaces) to ensure complete eradication of all life stages of bed bugs before they can escape from the home through cracks or holes in walls, floors, or ceilings. Bed Bug Heat Treatment Equipment is effective against all life stages including adult bed bugs (adults), nymphs (younger versions),

What Equipment Is Used To Heat Treatment For Bed Bugs?

There are many tools and methods available to help you heat treat your home for bed bugs.

The most common tool used in the treatment of bed bugs is a heat gun. A heat gun can be used to heat up your house on its own, or it can be paired with another tool to increase the effectiveness of the treatment. For example, it can be paired with an infrared camera to help you find areas that need more heat applied. The infrared camera will also allow you to see where there are holes in your home’s insulation so that they can be patched up before applying heat.

Another commonly used tool is an ozone machine. Ozone machines are especially effective at killing off eggs and larvae but will not kill adult bed bugs. They also have the added benefit of being able to purify the air by removing mold spores and other allergens from it as they work their magic on pests’ eggs and larvae. Finally, there are pesticides that are designed specifically for treating bed bug infestations; these pesticides usually contain pyrethrins or paradichlorobenzene (PDCB) as active ingredients.

Does Bed Bug Heat Treatment Ruin Electronics?

Bedbug heat treatment can ruin electronics. When a bed bug heat treatment is used to eradicate an infestation, the moisture in the air can cause your electronic devices to short-circuit. This means that if you have items plugged in at home, it’s important to unplug them before the treatment begins.

Additionally, if you have any pets or children at home, be sure that they don’t get near the equipment during treatment so they don’t accidentally burn themselves on a hot surface.

Cyclone Heater

A cyclone heater is a portable forced air heater that uses propane. It is used for pest control and for jobs that require portable heat, such as construction sites and woodworking shops. These heaters are not as powerful as direct-fired models but they are not nearly as noisy either, making them ideal if you have neighbors or family members who would be disturbed by the noise made by other types of heaters.

Ducting & Fittings

Ducting and fittings are the components of an HVAC system that produce a continuous flow of air. They’re the main devices in ventilation, space heating, and air conditioning. Depending on their size and shape, ducts can be made of metal or other materials like plastic or fiberglass.

Ducting works by transferring heated or cooled air from one place to another using vent. Heat exchangers transfer heat between two substances that differ in temperature by transferring heat energy from one substance to another until both reach thermal equilibrium (the same temperature). The most common type of heat exchanger is an evaporator coil which is used to cool the incoming air stream before it enters your home.

Floor Heaters

Floor heaters are useful for treating a large area. However, it’s important to note that you will need more than one-floor heater. You can’t just use one unit to treat an entire room, each heater needs to be able to generate the necessary amount of heat on its own without affecting other areas of the room. This means that you’ll need enough floor space for each individual machine so that they don’t overlap when they’re placed on their side (as most are).

The other important thing is temperature control: The minimum temperature should be at least 70 degrees Fahrenheit and no more than 80 degrees Fahrenheit when using a wall-mounted device like this one here; however, if you’re using a window-mounted device then there are some different requirements depending on how many windows there are in your home and how much natural light they let in during the day (more information about this further down).

If these requirements aren’t met then it could lead towards an unsuccessful bed bug treatment process. So make sure before buying anything off Amazon or elsewhere online to take into consideration what kind of equipment best suits your needs as well as who might come over during those four weeks after treatment ends.”

Flow Meter

Flow Meters are required for each heater, and can be purchased separately from your heat-treating equipment purchase. Flow Meters used in conjunction with Cyclone and Floor Heaters, which require a high volume of airflow to operate properly. Airflow is measured in CFM (Cubic Feet per Minute).

Manifold System

A manifold system is a great option for heat-treating bed bug-infested items. The system allows you to heat up the unit from all sides, which will help kill any remaining insects in your mattress. It also provides an even temperature throughout the item that’s being treated, so it doesn’t get too hot at any one point and cause damage or deformity.

The cost of installation varies depending on where you live, but it should be less than $10 per day of use if you install it yourself. You should take appropriate safety measures when installing or using a manifold system: make sure there are no gaps between your mattresses or box springs; keep an eye out for any sparks that might occur while using the equipment; and stay clear of open flames while using the equipment (or while installing it).

Rim Adapter

The rim adapter allows you to connect the hose of your heat-treating equipment to a duct or dryer. This connection can either be made for the purpose of connecting a heater to a hose or for connecting a hose to another piece of ducting (like when you need to use multiple hoses in your process).


  • A thermometer is a must-have for heat-treating your furniture. It is important to use a thermometer that can be calibrated, and one which will measure both Celsius and Fahrenheit temperatures.
  • You may also want to purchase a digital thermometer with an alarm feature in order to warn you of any changes in temperature during the treatment process. This will allow you to avoid overheating or underheating your items once they have been treated.
  • Since many homeowners do not have access to industrial-strength heaters, it’s important that they choose equipment that can be used safely in their own homes (without causing damage).

This equipment is necessary for heat treatment for bed bugs.

Heat-treating equipment is necessary for the heat treatment of bed bugs. Heat treatment is very effective in killing bed bugs, but it can take several days to fully eliminate them.

First, let’s talk about why heat treatment is necessary and what type of equipment you will need. Then we’ll get into specifics on how to set up your equipment and safety precautions.

Heat treatment works by killing bed bug eggs, nymphs (juveniles), and adults with time in an elevated temperature range between 122 degrees Fahrenheit and 158 degrees Fahrenheit (50 degrees Celsius – 70 degrees Celsius). It takes approximately one hour at 122 F / 50 C to kill 90% of eggs on contact with the surface they are resting on; however, heating will not penetrate deeply enough into cracks or crevices where eggs may be hidden from direct contact with a heated surface so additional applications may be required at other locations where they could potentially hatch out during prolonged heating periods.”

Leave a Reply

error: Content is protected !!
%d bloggers like this: