12‑Piece 6001 Respirator Filter Cartridge Set with 5N11 Prefilters

Description

Picture yourself tackling that tough paint job, working with powerful solvents, or handling harsh chemicals and knowing your lungs are fully protected. The 12‑Piece 6001 Filter Cartridge Set for Respirators (2×6001 cartridges, 2×covers, 8×5N11 particulate filters) is your go-to companion. It’s crafted to guard against organic vapors, paint fumes, and chemical particulates, giving you the confidence to focus on the task and not the hazards. You’re not just buying filters, you’re safeguarding every breath while you do what you love.

Key Customer Benefits

• Breathe Easy While Working: The activated carbon in each 6001 cartridge is NIOSH-approved to protect against a wide range of organic vapors, helping you confidently handle solvents and paints without lingering odors.
• Dual Protection for Peace of Mind: With 8 extra 5N11 particulate filters, you’re protected not just from chemical vapors but also from dust, paint overspray, and fine particulates, a complete safeguarding system.
• Lightweight Comfort During Long Tasks: Known for low breathing resistance and a swept-back design, these cartridges offer comfort during extended use so your focus stays on the job, not fatigue.
• Effortless Setup So You Can Get to Work: Featuring a simple bayonet-style twist-and-lock, the cartridges and pre-filters are easy to attach in seconds, no tools, no hassle.
• Reliable, On-The-Go Safety: The set includes two cartridges, two covers, and replacement filters, perfect for keeping spares on hand without scrambling mid-project.
• Trusted by Pros and DIYers Alike: Compatible with popular 3M respirator masks (6000, 6500, 7500, 7800, FF-400 Series), it’s a choice backed by a brand safety experts have relied on for decades.
• Kid-Safe and Secure Storage: The included covers protect unused cartridges from dust and moisture; ideal for safe, organized storage between uses.

Product Description

Think back to the last time you were knee-deep in a project, spraying paint in the garage, cleaning up after that weekend refinishing project, or working with solvents in the shed. Your lungs are what carry you through those moments but only if you guard them right. That’s exactly where this 12‑Piece 6001 Filter Cartridge Set steps in. It’s a thoughtfully curated kit (2×6001 organic vapor cartridges, 2×covers, 8×5N11 particulate pre-filters) designed to help you stay safe and comfortable.

These aren’t your run-of-the-mill filters. Each 6001 cartridge is built with premium activated carbon, NIOSH-approved to shield you from organic vapors like solvents, paint fumes, and pesticides, handling concentrations up to 10× OSHA’s PEL with half-face masks or 50× with full-face masks, once fit-tested. The swept-back, low-profile design keeps your line of sight clear and breathing natural, while the lightweight build means it’s easy to wear all day.

Ever been in a dusty yard or sanding session and felt that tickle in your throat? That’s where the 5N11 pre-filters come in. They’re NIOSH-certified N95 filters, catching 95% of non-oil particulates, even fine paint overspray, dust, and pollen. Slip them over your cartridges in seconds using the 501 filter retainer, and you’re protected on two fronts.

Let me share a quick example: Jenny, a woodworker friend, had to dismantle an old cabinet, complete with varnished layers and gritty sawdust. She popped on the 6001 cartridges and pre-filters, and before she knew it, she was powering through cleanup without coughing or smelling that lingering varnish in her mask. She finished, packed everything away with the included cartridge covers, and got back to her passion, breathing freely.

This set delivers pro-grade protection with home-shop ease: twist on the bayonet cartridges, clamp on a pre-filter, and you’re ready, no fumbling or special tools. When the job wraps up, pop on the covers and keep everything fresh for your next passion project.

Product Specifications

Feature	Spec
Includes	2 × 3M 6001 Organic Vapor Cartridges + 2 × Covers + 8 × 3M 5N11 N95 Prefilters
Filter Type (6001)	Organic vapor cartridge
Protection Level (6001)	NIOSH‑approved for organic vapors, up to 10× OSHA PEL (half-mask) / 50× (full-mask)
Design (6001)	Low-profile, swept-back bayonet; diameter ≈ 3.4 ″ × 4.2 ″; lightweight ~0.18 kg
Filter Type (5N11)	NIOSH‑approved N95 particulate filter
Efficiency (5N11)	Filters ≥95% of non-oil particles (~0.3 µm)
Compatibility	Fits 3M 6000/6500/7000/7500/7800/FF‑400 facepiece series with 501 retainer
Installation	Quarter‑turn bayonet for cartridges; snap‑on for pre‑filters with 501 retainer
Storage	Cartridge covers included to prevent dust/moisture exposure
Certifications	NIOSH‑approved; 5N11 rated N95, 6001 rated OV (organic vapor)

 

How to Use / Installation Guide

a) Inspect & Prep

• Unbox and visually inspect each 6001 cartridge, pre-filter (5N11), and filter retainer (501) to ensure they’re clean and undamaged.
• Confirm compatibility: these fit 3M half- and full-face respirators (6000, 6500, 7000, 7500, 7800, FF-400 series) thanks to the bayonet system.

b) Attach the 6001 Cartridges

1. Hold the respirator mask firmly.
2. Align the bayonet tabs on the 6001 cartridge with the slots on the mask.
3. Twist a quarter turn until it locks securely; easy, tool-free, and secure.
4. Repeat on both sides to form a tight seal.

c) Mount the 5N11 Pre‑Filters

1. Place one 5N11 filter over an attached cartridge.
2. Snap the 501 filter retainer over it, this holds it in place and ensures airflow goes through both filters.
3. Repeat for the other side.

d) Fit Check & Breathing Test

• Put on your respirator and adjust straps until snug (no gaps at cheek/chin).
• Seal test: cover a cartridge, inhale gently, mask should pull in tightly. No airflow? You’re sealed.
• Smell test: if, while doing a job with strong odors like paint or solvent, you begin to smell fumes, it’s time to swap the cartridge, even if no visible damage.

e) Usage Duration & Replacement Tips

• Organic vapor cartridges (6001) are NIOSH‑approved for up to 10× OSHA PEL on half-masks and 50× with full-face once fit‑tested.
• There’s no airflow warning, you’ll know it’s tired when you smell vapors or breathing gets harder. Experts recommend swapping more frequently in heavy-use situations.
• 5N11 pre-filters meet N95 standards, replace them when they clog, get dirty, or breathing becomes harder.

f) Storage & Care

• Wipe cartridges with a clean cloth after use.
• Pop on the plastic covers when not in use, this keeps dust and moisture away.
• Store in a cool, dry place away from sunlight.
• Keep your respirator in a sealed container to prolong cartridge/filter life.

Pro tip: Label each cartridge with the date you first opened it, especially if you’re not using them regularly. That way, you’re never left guessing if they’re still fresh, and your lungs will thank you.

FAQs

Q1: How often should I replace the 6001 cartridges?

A: There’s no fixed expiration, but a simple rule helps: replace them when you notice odors, if breathing gets harder, or after long exposure to heavy solvents. In low-use cases, a visual check for clogged surfaces and a sniff test give you the insight. Technicians often replace them before each major project. They’re NIOSH‑approved for use up to 10× OSHA PEL on half‑masks and 50× on full‑masks, but only if the seal is good .

Q2: Can I leave the 5N11 pre-filters on all the time?

A: Absolutely. They protect against dust, paint overspray, and pollen. When they get dirty, dented, or feel harder to breathe through, it’s time to swap them out. Keeping them on also prolongs cartridge life by stopping particulates from clogging the activated carbon early .

Q3: Can I clean or wash these filters to reuse them?

A: It’s best to treat them as disposable. 3M does not recommend washing or disinfecting filter media, moisture can degrade the electrostatic fibers and reduce effectiveness . Once they’re contaminated or dusty, just replace.

Q4: Are these cartridges safe for use with solvents like paint thinner or lacquer?

A: Yes, these cartridges are specifically designed for organic vapors, including paint thinners, lacquers, turpentine, fuel vapors, and solvents. A DIY refinisher I know, Jenny, used them during cabinet stripping and finished the job without coughing or lingering smells, a real win.

Q5: Will this set fit my 3M 7500 mask?

A: You bet. These are bayonet-style cartridges compatible with 3M 6000/6500/7000/7500/7800/FF‑400 respirators. Just twist on, snap on the 5N11 pre-filters with the 501 retainer, and you’re good to go, no adapters needed .

Q6: How should I store my filters and cartridges to keep them fresh?

A: Always wipe them clean after use, attach the plastic covers, and store in a cool, dry place. Ideally in airtight zip bags or a sealed container. It keeps dust and moisture out and maintains performance until your next use .
Pro Tip: Label with the date you first opened them, makes tracking much easier.

Final Notes

You’ve got everything you need, the powerful 6001 organic vapor cartridges, the reliable 5N11 N95 particulate filters, plus convenient covers and a trusted bayonet system; all packaged in one thoughtful, safety-first set. Whether you’re barrel-sanding an heirloom table, refinishing cabinets in the driveway, or prepping walls for a fresh coat of paint, this kit has your back (literally in your respirator).

Think of it as a first mate, always standing by. You’re breathing easier, working more confidently, and focusing on what you love, instead of worrying about fumes or dust.

Ready to take the next step?

• Add the 12‑piece 6001 Filter Cartridge Set to your cart
• Label your cartridges with the date and consider adding a spare set to your garage shelf
• Dive into your next project with peace of mind and clear lungs!

If you hit a snag along the way, or just want advice for a specific material or environment, I’m here, just ask!

Your lungs deserve the best. Let’s get you set up for success.