Bird B Gone White Plastic Bird Spikes 10 ft, Humane Pigeon Deterrent

Description

If pigeons have turned your ledge into a mess, the Bird B Gone, White Plastic Anti Bird Spikes 10 ft kit is a simple, humane way to take back your space without hurting a single bird. These UV-stabilized polycarbonate strips are made in the USA, designed for rooftops, window ledges, parapets, and fence tops where pigeons love to loaf, and they stop landing by removing the comfortable perch birds are seeking.

Key Customer Benefits

• Humane, non-lethal peace of mind. Spikes simply remove the comfy landing strip so pigeons and larger birds choose another perch, which animal-welfare groups and public agencies recognize as a humane physical barrier when installed correctly.
• Real results on problem ledges. Field research on urban buildings reports large, durable reductions in pigeon presence when spikes are used appropriately, because birds are physically prevented from roosting on treated edges.
• Built for sun, rain, and rooftop heat. The Bird B Gone plastic spikes are molded from UV-stabilized polycarbonate, designed for outdoor exposure and backed by a manufacturer warranty, so they hold up where metal can corrode or paint can fail.
• Easy DIY install with pro-grade tips. Strips come pre-assembled in sections that glue, screw, or tie to most clean, dry surfaces, and the manufacturer’s installation guide walks you through measuring, spacing, and layering rows for full coverage.
• Fits the places birds love. Designed for rooftops, window sills, parapets, signs, and fence tops, with widths sized for typical ledges so you can cover narrow trims or deep caps without guesswork.
• Made in the USA from trusted materials. You get domestic manufacturing quality control and proven materials specifically formulated for bird work, which helps ensure consistent performance over time.
• Cost-effective part of an IPM plan. Spikes reduce the incentive to perch where droppings accumulate, and when combined with sanitation and access control, they help cut cleanup labor and recurring messes. Public-sector guidance lists spikes among the most economical physical barriers.

Product Description

What this product is

Bird B Gone White Plastic Anti Bird Spikes, 10 feet total length, are UV-stabilized polycarbonate spike strips that stop pigeons and other larger birds from landing on your ledges, roof edges, parapets, signs, and fence tops. The 10-foot kit typically arrives as five pre-assembled sections, each section is 2 feet long, so you can run a clean, continuous line on problem edges. The plastic base is flexible and includes glue troughs and pre-drilled holes, which means you can glue, screw, or tie the spikes to most clean, dry surfaces. The 7-inch model is sized to cover roughly 6 to 9 inches of ledge when rows are installed correctly, and the spikes stand about 4.5 inches high. All models are made in the United States.

How it works, and why birds leave

Spikes do not poke or trap birds. They simply take away the flat, comfy landing strip that pigeons seek. The tips are blunt, spacing is tight, and the base follows gentle curves, so a pigeon, gull, or crow cannot set its feet and balance. The result is a harmless but decisive “no-perch” message that sends birds to a different, acceptable roost. Humane groups and public guidance consistently describe anti-perching spikes as a non-lethal exclusion method when they are installed properly, which is why facilities managers and councils list them among preferred physical barriers.

What makes Bird B Gone’s plastic spikes effective and different

First, the material. Bird B Gone molds these spikes from UV-stabilized polycarbonate that holds up on hot, bright rooflines and does not conduct electricity, which can matter near antennas or low-voltage devices. Second, the form factor. You can choose widths, commonly 3, 5, or 7 inches, and stack rows to match your ledge depth for edge-to-edge coverage. Third, the build. Two-foot sections install fast, and the flexible base lets you follow drip edges, signs, caps, and even gentle arches. Finally, the brand. Bird B Gone manufactures spikes in the USA and backs them with published installation guidance and support, which helps DIY users and pros get it right on the first pass.

Practical Scenario

Independent urban wildlife research has repeatedly found that well-installed spikes can cut pigeon presence by large margins, because they physically block the preferred perch. One campus study reported nearly a 70 percent reduction on treated buildings compared with other measures. Government preservation guidance likewise lists spikes as economical and effective, while noting that coverage and correct placement determine results. Translation for a homeowner, if you size and place the rows to remove every comfortable toe-hold, you will see the mess and noise drop sharply.

Product Specifications

Feature	Details for this product
Total length in box	10 feet total, supplied as pre-assembled spike strips in 2 foot sections for fast layout and trimming.
Model, color, width	Model family BBG2000. Common white 10 ft kit is sold as BBG2000-7WHT-10 at 7 inch width. White blends well on painted trim and fascia.
Coverage guidance	Choose spike width to match ledge depth. Manufacturer suggestions, one row per ledge: 3 inch spikes cover 1 to 5 inch ledges, 5 inch cover 5 to 7 inches, 7 inch cover 6 to 9 inches. Wider surfaces may need multiple rows placed edge to edge.
Section length and base	Each strip is 2 feet long with a flexible polycarbonate base, glue troughs on the underside, and pre-drilled, offset screw holes for easy fastening. Break-away points help you shorten sections without power tools.
Spike height	4.5 inches tall to remove stable perching space for pigeon-sized and larger birds. Tips are blunt for humane exclusion.
Material	UV-stabilized polycarbonate, non-conductive, one-piece construction. Safe near low-voltage devices and antennas because it does not carry current or interfere with transmissions.
Temperature resistance	Rated for extreme conditions, roughly 310 degrees Fahrenheit high to minus 200 degrees Fahrenheit low. Suitable for hot rooflines and winter freeze cycles.
Where to use	Roof peaks, parapets, caps, window sills, beams and I-beams, eaves, signs, light poles, and similar perching edges on residential or commercial buildings.
Humane fit and limits	Sized for pigeons, gulls, crows, and larger birds. Not recommended where birds are actively nesting or for very small species, since they can fit between points. Pair with netting or screening where nesting pressure exists.
Fastening methods	Glue with outdoor construction adhesive, or screw or tie with UV-rated cable ties. Surface must be clean and dry, then measure the full depth so points deny every landing spot.
Warranty and origin	Made in the USA with a 5 year manufacturer warranty against defects and UV breakdown.
Safety and cleanup	Wear gloves, eye protection, and a suitable respirator when cleaning accumulations of droppings. For large deposits, consider professional cleanup. CDC and NIOSH note PPE is important because of potential Histoplasma exposure.

 

How to Use and Install Bird B Gone White Plastic Bird Spikes, Step by Step

Before you start, check for nests and plan coverage

Look closely for any active nests. In the United States, most nests are protected by the Migratory Bird Treaty Act, which means you should not disturb eggs or chicks. Authorities recommend waiting until a nest is inactive unless there is an immediate safety risk.

Now measure the full depth and length of each ledge or cap. Choose spike width to match the surface so there is no comfortable toe-hold left. Bird B Gone’s installation guide shows 3, 5, and 7 inch options and emphasizes complete edge-to-edge coverage for consistent results.

Safety first, for you and your home

Wear gloves, eye protection, and a respirator when you clean accumulations of droppings. NIOSH notes that Histoplasma can be present in dried bird manure and recommends PPE during cleanup. For large accumulations, the CDC advises using industrial vacuum methods or hiring qualified professionals. If you will be within six feet of a roof edge, follow OSHA fall protection rules, for example guardrails or a personal fall arrest system.

Step 1. Clean, disinfect, and dry the surface

Remove loose debris, leaves, and any old nesting material, then disinfect. Bird B Gone’s instructions call for a hospital-grade disinfectant and a fully dry surface before installation. Their tip sheet also outlines wetting, double-bagging debris, and sanitizing the area before you set spikes. Take the time here, a clean, dry substrate is what allows adhesive to bite and hold.

Step 2. Choose the fastening method that matches your substrate

• Concrete, brick, steel: Run a continuous bead of outdoor construction-grade adhesive in the built-in glue trough, press the strip until adhesive mushrooms through the screw holes for a mechanical lock. One standard caulking tube covers about 25 feet of spike. Manufacturers and spec sheets advise using non-silicone construction adhesive for masonry and metals.
• Wood: Fasten with wood screws through the pre-drilled, offset holes, with a screw at the ends and about every six inches along each section.
• Pipes, conduit, and small round surfaces: Use UV-rated nylon ties or hose clamps. You can also add adhesive under the base for extra stability.

Adhesive type and curing: Bird B Gone sells polyurethane construction adhesives and an E6100 industrial adhesive. Typical cure windows are 24 to 72 hours, depending on temperature and humidity. This is consistent with data sheets for one-component polyurethane construction adhesives, which reach full cure in roughly 24 to 48 hours. Plan your install so the bond is not stressed until cured.

Step 3. Dry-fit and mark a straight line

Lay out the two-foot sections without glue to confirm coverage. The manufacturer’s tips emphasize measuring first and leaving no gaps behind or in front of the points. Use painter’s tape or a chalk line to guide straight runs along fascia or parapets.

Step 4. Placement that birds cannot beat

Follow these three spacing rules from the installation sheet:

1. Keep the back of the base within 1 inch of the wall or back stop, so birds cannot nest behind.
2. Allow about one half inch overhang in front, so there is no balancing edge.
3. Join the next section End A to End B as labeled, which keeps the spike pattern continuous. On deeper ledges, use multiple rows and overlap adjoining sections by about one inch for a seamless barrier.

Step 5. Glue, press, and set

Run a consistent bead in the glue trough, press each section firmly so adhesive rises through the holes, then wipe any squeeze-out that could collect dirt. If your product manual suggests temporary mechanical support while adhesive cures, use it, and avoid foot traffic or ladder pressure on the strips until cured.

Step 6. Corners, curves, and cut-to-fit details

The polycarbonate base includes break-away points between screw holes. You can shorten sections by twisting at these notches or by cutting with snips. For inside or outside corners, cut shorter pieces and stagger them so the pattern stays tight. On conduit or letters, bend gently, add ties, and keep the one inch back gap rule. The brand’s stainless and plastic spike sheets both describe flexible attachment on curved features.

Step 7. Final check and first week follow-up

Walk each run and look for holes that a pigeon could exploit, for example a drain scupper or sign bracket. Patch with short off-cuts. After the first few days, recheck bond lines, especially on hot or dusty ledges, and add fasteners if a strip lifted before the adhesive finished curing. The manufacturer highlights that complete coverage and secure attachment are what stop perching and nesting attempts.

What not to do

• Do not install spikes where birds are currently nesting. Wait until nests are inactive or consult wildlife authorities for guidance.
• Do not rely on silicone caulks for masonry or metal. Use an outdoor construction-grade or polyurethane adhesive that is listed for your substrates.
• Do not work near roof edges without fall protection, even for short tasks. OSHA’s construction rule requires protection when you are six feet or more above a lower level.

Field-tested pro tips

• Pre-cut end caps from scrap to close gaps at the end of a run or around a downspout. A two-inch filler can stop the one bold bird that keeps trying. The installation sheets show the base is easy to cut and adapt.
• If you have heavy droppings, pre-wet, shovel, and double-bag, then disinfect. NIOSH and Bird B Gone’s cleaning guides both stress PPE and decontamination.
• On wide caps over nine inches, map two parallel rows edge to edge. It is better to do two tight rows that deny every landing zone than one row that leaves a perchable lip. The manufacturer depicts multi-row layouts for broad surfaces.

If you follow these steps, you will install your humane pigeon deterrent the way the pros do.

Frequently Asked Questions

Do bird spikes hurt birds?

No. Properly designed spikes have blunt tips and work by taking away the comfortable landing strip, not by piercing or trapping. That is why public agencies and conservation bodies describe spikes as a humane physical barrier for larger birds such as pigeons when installed correctly.

Will these plastic spikes stop small birds like sparrows and starlings?

Spikes are sized for pigeons, gulls, and other larger birds. They are not a first-line solution for small birds that can fit between points or nest behind incomplete coverage. For small-bird pressure, use netting or other exclusion sized to the species.

Do they work for gulls on roofs and chimney stacks?

Yes, on the right surfaces. UK council guidance lists spikes among effective proofing measures on parapets, dormers, and chimney heads. On wide flat roofs with active nesting, consult a professional for a full plan that may combine spikes with netting or wires.

Which width and how many rows should I use on a ledge?

Match the spike width to the depth of the surface and remove every toe-hold. Bird B Gone’s installation sheet shows 3, 5, and 7 inch widths, advises keeping the back of the base within 1 inch of the wall, allowing a small front overhang, and adding multiple rows for broader caps.

What adhesive should I use and how long does it take to cure?

Bird B Gone specifies outdoor construction-grade adhesive for masonry and metal, with bonding aided when adhesive mushrooms through the screw holes. Their E6100 industrial adhesive reaches handling strength in about 24 hours and maximum bond in 48 to 72 hours, which aligns with common polyurethane construction adhesives that call for mechanical support during the first day.

Can I install spikes where birds are already nesting?

Do not install over active nests. In the United States, most nests, eggs, and chicks are protected by the Migratory Bird Treaty Act, so you must wait until the nest is inactive or obtain guidance from wildlife authorities.

Will incorrectly installed spikes make problems worse?

It can happen. Extension guidance warns that poor placement can create sheltered pockets that birds use for nesting. The fix is careful planning, edge-to-edge coverage, and closing small gaps around brackets, scuppers, and corners.

How long do polycarbonate spikes last in the sun and cold?

Bird B Gone’s UV-stabilized polycarbonate is non-conductive and not affected by extreme temperatures, and the product carries a five-year warranty. That combination makes plastic spikes a good fit near antennas and in hot roofline environments where metal corrosion is a concern.

Are the spikes obvious or likely to harm historic fabric?

Spikes are effective but can be visually noticeable. Historic England notes they can be obtrusive and should be installed in a reversible way that avoids damage to significant features. Choose color carefully and follow non-invasive fixing guidance where aesthetics matter.

How do I attach spikes to gutters, conduit, or round rails?

Use UV-rated cable ties or hose clamps. Bird B Gone’s instructions show tying spikes to pipes and gutters, and you can add adhesive under the base for extra stability.

Do I need safety gear when cleaning droppings before installation?

Yes. For small areas, wear gloves and a suitable respirator and wet down droppings before removal. For large accumulations, the CDC and NIOSH recommend professional cleanup or industrial vacuum methods due to Histoplasma risk.

Do bird spikes actually reduce pigeon activity long term?

When installed correctly, spikes have shown large reductions in pigeon use of treated ledges because they physically block preferred perches. A peer-reviewed campus study reported nearly a 70 percent reduction on buildings protected with spikes.

I read online that birds sometimes nest on top of spikes. Is that true?

It can occur where gaps exist behind or between rows, or where debris builds up. Forum and council threads mention these edge cases. The remedy is designing for complete coverage, maintaining the area, and combining spikes with netting when you have heavy nesting pressure.

Are spikes legal on residential fences and balconies?

Generally yes when used responsibly and out of human reach, but rules vary by country and conservation status of buildings. In the UK, authorities treat them as a non-lethal proofing option and advise considering height, access, and listed-building consent. In the United States, avoid installing over active nests and follow local building codes.

Any quick pro tips from the field?

Dry-fit sections first, keep the back of the base within one inch of the wall, overlap adjoining two-foot sections for continuous coverage, and check bonds after the first week. These are all in the manufacturer’s instructions and they are the reason pro installs stay put.

Conclusion

If you are tired of washing pigeon mess off your sill every weekend, Bird B Gone White Plastic Anti Bird Spikes give you a simple, humane, and proven way to reclaim that space. The spikes deny the flat, comfy perch birds need, which public guidance recognizes as an effective physical barrier when installed correctly.

From a durability standpoint, the kit is made from UV-stabilized polycarbonate and manufactured in the United States, with a published five-year warranty. That combination is why these spike strips hold up on hot rooflines and coastal ledges where cheaper plastics can fail.

Success comes down to coverage. Measure the full depth of each ledge and choose widths that remove every landing zone, then run continuous rows with no gaps. The manufacturer’s instructions outline the practical rule of matching 3, 5, or 7 inch spike widths to your surface and adding multiple rows on broader caps.

One last safety note before you begin. Clean and disinfect surfaces with proper PPE, and bring in a pro if you are dealing with large, dried accumulations of droppings, since NIOSH and CDC flag Histoplasma exposure as a real risk during cleanup.