Bed bugs are difficult to detect if you don’t know what to look for. They can be very small and hard to spot, especially if they’re hiding out inside your mattress or box springs.
Co2 bed bug traps are a humane way to get rid of bed bugs, without harmful chemicals. Bed bugs are small, flat insects that can be difficult to spot. Co2 bed bug traps attract and kill bed bugs by releasing carbon dioxide gas, which is odorless and colorless. Co2 beds can be laid out in a box or on a flat surface and will catch any bed bugs that come near them.
Bed bugs are small parasitic insects that feed on blood from humans and animals. They are found all over the world, but are mostly found in warm climates such as those found in America, Europe and Asia. There are different types of bed bug bites including red welts, itching or swelling at the bite site, fever, chills and flu-like symptoms (including headache).
There are several ways that you can get rid of these pests including heat treatment devices like steamers or smoke bombs; room sprays such as pyrethrin or permethrin; insecticides such as DDT; vacuuming mattress covers and upholstery seams; washing clothing in hot water with soap; vacuuming carpets where possible; sealing cracks around windows and doors if it is not possible to remove crevices between floorboards then sealing those gaps.
What Is CO2 for Bed Bugs?
CO2 is a colorless, odorless gas that can be released into the air to kill bed bugs. It is often used in combination with other methods such as heat or pesticides.
This gas is not toxic to humans and pets, but it will kill bed bugs within 24 hours. It is best used in combination with other methods of pest control such as heat or pesticides.
How Do You Make CO2 Traps for Bed Bugs?
There are a few different ways to make CO2 traps for bed bugs.
First, you can use a carbon dioxide fire extinguisher. The gas that is released when the extinguisher is activated can be collected and used as a trap.
Another option is to use a CO2 detector. These detectors are usually hooked up to the outside of your house or apartment and emit a loud noise when they detect CO2 in the air. You can then use this signal to alert you that there are bed bugs nearby.
Lastly, it’s also possible to use a home-made CO2 trap using an old tissue box or any other container with holes in it. The holes should be small enough so that only air passes through them, but big enough so that bed bugs can’t crawl into them easily.
How Long Do CO2 Traps Last?
CO2 traps are designed to last for approximately one year. If you’re looking to go longer than that, it’s possible to purchase replacement filters, but it’s not recommended.
The CO2 filter should be changed every six months, or sooner if the odor starts to become noticeable. The carbon dioxide is released from the trap when it’s full of air and needs to be replaced.
If you’re using your CO2 trap as intended, it should last you at least that long. If you’re using your CO2 trap improperly, though—for example by leaving the sensor off or by storing it in a warm place—it may not last as long.
You can test your CO2 trap by opening the door to see if there’s any leakage coming out of the sensor. If there is, then it’s time for a new one.
Homemade CO2 Traps for Bed Bugs
If you have a bed bug infestation and don’t have the money to hire professionals, then you might be wondering if making your own CO2 traps will work. The answer is yes.
Using a homemade CO2 trap is an effective way to remove bed bugs from your home. A bed bug is attracted to CO2, which they find in their environment, so a homemade CO2 trap can be used to catch these pests.
There are many ways that you can make your own CO2 trap, but the most effective method is a simple, inexpensive device that uses a jar and a piece of plastic tubing attached to it.
The first step is to place all of your bed bugs into one jar or container together. Then place this jar inside another container that has been filled with water and sealed tightly so no air can enter through its lid or sides.
Next, attach one end of the plastic tubing to the outside of your new container and place the other end into another jar or container full of diluted rubbing alcohol (about 1/4 cup per gallon). Now place this second jar inside another container with water inside it so that there’s enough space between them for air circulation without causing leaks when shaken around during transport between locations.
List of CO2 Bed Bug Traps Product and Where to Buy
To find out more about our co2 bed bug traps, please click the links below.
Ortho 0465705 1, 2-Pack Use in Your House or When Traveling, Part of a 3-Step Solution System
Price : $9.99
- Use the Ortho Home Defense Max Bed Bug Trap NOW to detect bed bugs if you have them, and use LATER to confirm they’re gone
- Use at home or when traveling
- This is the first step of a 3-step bed bug solution system; this product should not be used to control or eliminate an ongoing bed bug issue
- If bed bugs are detected, you should begin treatment immediately with Ortho Home Defense Max Bed Bug products in steps 2 & 3
- Contains 2 traps–each trap lasts 2 weeks
Additional Info :
Catchmaster Slider Bed Bug Trap & Insect Monitor, Detector, and Interceptor – for Early Detection ONLY, Not for Bed Bug Extermination – 12 Traps
Price : $15.87
- NOT AN EXTERMINATION DEVICE – This product is designed to detect ONLY. Once a Bed Bug infestation is confirmed, you must contact a pest control professional to properly exterminate and treat the infestation
- EARLY BED BUG DETECTION – Detect bed bugs before it’s too late. Our Unique early bed bug detection device cleverly attracts and traps bed bugs in an adhesive. An effective tool for bed bug prevention and control.
- WHERE TO USE IT – Place 4 traps per bed (one under each corner). You can also install them behind curtain rods, on window sills, in closets, behind the bed head board, under furniture like a night table, in dresser drawers and along baseboards.
- ADDITIONAL PLACEMENT OPTIONS – The Slider Interceptor can also be placed under couch cushions and in other upholstered furniture, under crib mattress, inside luggage, in cars and under car floor mats, in and around cubbies/lockers at schools, and along baseboards
- STRONG PLASTIC CONSTRUCTION – allows for use under mattresses and will not get crushed Includes Bedbug Prevention & Detection Guide – Proudly made In the USA
Additional Info :
Zulu Supply Bed Bug Interceptors, Black, Traps, 8 Pack, Bedbug Monitor, Detector for Bed Legs or Furniture (Black)
Price : $25.99
- New Design and Universal Fit – Zulu Supply’s unique design fits more bed types and different kinds of furniture with a large 4.25 inch inner diameter
- Low Cost – Less costs than other bed bug interceptors
- Safe – Zulu Supply interceptors are safe to use
- High Quality – Durable, heavy duty construction that fits most bed sizes and lasts for years
- Pack of 8 – Each box contains a set of eight (8) White Zulu Supply Bed Bug Interceptor
Additional Info :
Harris Bed Bug Traps for Early Detection & Monitoring, 4 Pack
Price : $4.93
- Made in United States
Additional Info :
HARRIS Bed Bug Traps – Parent (20-Pack)
Price : $15.99
Additional Info :
Co2 bed bug traps are a great way to get rid of bed bugs. They are also safe for people, pets, and the environment. The Co2 Bed Bug Trap is a great option for bed bugs. It’s effective, easy to use, and affordable. The only downside is that it takes up some space on your countertop.